What should be paid attention to in the composition and construction of seismic support?

     The seismic bracket consists of an anchor solid, a reinforcing boom, a diagonal brace, and a seismic connecting member. The distance between the suspension screw and the node of the pipeline shall not exceed 0.1m, and the screw shall be reinforced as needed. If two rigid seismic supports in reverse direction are set up in the same position, the suspension screw can be dispensed with. Considering the load of seismic forces, the suspension screws and structural anchors of rigid seismic support need to be enlarged, and the greater bearing capacity of the screws and anchors needs to be greater than the calculated seismic forces.

　　

The seismic bracket can provide full protection for the water supply and drainage system, air conditioning system, and electrical pipeline system in an earthquake,

so the seismic bracket must be greater than the seismic force at any time and at any installation angle. The seismic load in the horizontal direction can be borne

by two seismic supports in different directions, i.e., the lateral seismic support bears the lateral load, and the longitudinal seismic support bears the longitudinal load.

All seismic supports must be reliably connected to the structure. It is rigidly connected with the beams and columns of the reinforced concrete frame structure,

and flexibly connected with the steel structure, and must be checked by the designer.

To choose a seismic bracket, Shanghai Lianyu Industrial Co., Ltd. specializes in the production of seismic brackets